Tips for Using Silk Threads

There are two main types of silk threads, spun and filament.
Filament has a great amount of luster since they are created
from long, continuous strands, as they are unwoven from cocoons.
Spun silks are made form short fibers, which gives it a creamier
luster. 

Silk is great to use for several reasons. First, because of its
smooth surface, silk flows easily through Aida, Canvas or any
other fabric. And second, it is easier to use than cotton
because it’s “smooth” whereas cotton is “fuzzy”. Unfortunately,
it does have its own unique challenges so here are some hints on
how to make using silk easier.

1. Spun silk strands should be separated and recombined just
like cotton 2. Use short lengths to maintain maximum sheen 3.
Keep silk dry at all times and make certain hands are clean 4.
Use a needle one size smaller than normal so there is less area
in the eye for the thread to wear upon. 5. For the best effect
use a laying tool to keep the strand flat 6. Don’t wrap your
silk floss on a bobbin 7. Watch what end you thread your needle,
as spun silk has a direction to it. Let the thread dangle and
pull out a ply, if it comes out easily, that is the end in your
needle. 8. Don’t try to squeeze the last stitch in since the end
of the thread is the most worn. 9. Don’t use the same needle for
silk that you use for metallic threads due to the fact that
metallics abrade the inside of the eye of the needle. 10. If the
silk has picked up a lot of static, run the thread across your
forehead (unless you’re wearing makeup). The oil tames the
static.